|
|
BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
(updated 6/7/11)
Due to a shortage of donor brackets I will have to start doing the exchange program in order to keep my prices the same. So there will be a $50 core charge upfront.
When you install my battery bracket, mail me your stock one back and I'll refund you the $50 core fee.
If you still want to keep your stock tray, I'll keep the $50 core charge.
SO GET THIS FOR $60 + $15 SHIPPING (LOWER 48)
OR GET THIS FOR $30 + $15 SHIPPING (LOWER 48)
FAST TURNAROUND AND 24/7 CUSTOMER SUPPORT INSTRUCTION
GET THEM WHILE I STILL FEEL LIKE MAKING THEM!
IGNITION SIDE SHOT
CHAIN SIDE SHOT
LIST OF CUSTOMERS SO FAR...
-CaptainMidnight
-Professor2
-PogueMahone
-Jaeger
-MercKing
-SDKimo
-midnight7503
-The Insane Viking
-swa
-trimoto
-knoxville
-Smaug
-ShaneW
-FRIARJOHN
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
LIST OF CUSTOMERS SO FAR...
-CaptainMidnight
-Professor2
-PogueMahone
-Jaeger
-MercKing
JOIN THE CROWD FELLAS!
haha
|
|
boof
|
|
(Adjunct)
|
|
09/29/09 04:05 PM
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
How have they been going with the weight of the battery and only the top mounting bolts keeping it all together
Just thinking it would be viberating a bit not being fixed at the bottom
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Ian, thanks for the question. There is no visable vibration. In fact theres no movement while trying to wiggle it with your hand. The plate itself is 1/8" thick steel and is very rigid. Perhaps if it was vibrating like harley it'd be a different story..haha
And as far as the brackets holding up... I orginally did this modification in 2007 12,000 miles ago. I have cut front and rear springs on the hardest setting, and ride on some very turbulent roads. Ive never had a problem, especially at the bend point. Ive actually never even had a fender bolt come slightly loose either.
|
|
boof
|
|
(Adjunct)
|
|
10/01/09 03:18 PM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Thanks for the reply mate PM has been sent
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
JUST IN TIME FOR CHRISTMAS!!!
ALL PRICES WILL STAY THE SAME!
WOOO!
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
User SDKimo added to the list of customers
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Are you still making these? and also do you need our battery box to make it, or can you supply it without an exchange?
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
I'm pretty sure I have an extra one laying around. Since youre in Austrailia I understand your concern about shipping. I'll see what I can do. Just shoot me a PM when youre ready to talk. I'll be working on one this week for another member here, I'd be able to work on yours at the same time. Shipping obviously would be your biggest concern.
Thanks
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
PM sent
|
|
JAEGER
|
|
(Adjunct)
|
|
03/01/10 11:05 AM
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
<--- Happy customer! Finally got mine installed after ordering back in November (it's been sitting in my garage for months) -- bolts right in and works like a charm, just as promised!
--Jaeger
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
midnight7503,
The Insane Viking,
& Jaeger
Added to the list of customers
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
interested in one if you have any more,,,, my stuff is still all installed so I'd need to get those filters somewhere and then I guess just sawzall the stoock box out and go from there.
PM or e-mail me the details
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
I would like to get this set up .Are the prices the same ,also would it be possible to get the matching triangle piece welded on the other side like the one on that other guy's post?
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
+1, if your starting up the machinery, I'm in for one as well.
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
I dont weld or have a welder so no triangles for now. PM me when you guys are ready to put an order in.
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Can we get some before and afrer pics of this mod?
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Quote:
Can we get some before and afrer pics of this mod?
pics on page 1
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Ok..is this before?????or after????? I asked for both
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
that is after. before looks just like a stock bike
|
FriarJohn
|
|
("Lighten up, Francis.")
|
|
05/13/10 09:51 PM
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
ROFL!!!
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
So you just leave it like that? You dont cover it up or anything? Whats the point in that, I dont think it would look as good as stock.... IMO
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Quote:
So you just leave it like that? You dont cover it up or anything? Whats the point in that, I dont think it would look as good as stock.... IMO
A lot of people agree with you. Thats why the freak kit is so popular. Other people (myself included) prefer the old school look. Also, the freak will run you about $300, while Tom's relocation kit is only $60.
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
On the other hand, there are a lot of guys that don't like the stock look. I wish I could have a different America for every style concept, I like them all
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Man?....I go on vacation for a week and this threads on fire!...haha Thanks for filling in for me fellas.
Yeah man thats what it looks like. I was originally going to make sidecovers for it when I first did it, but I liked it opened up with that bare bones cut-up look to it. I was actually surprised that so many people liked it as much as I did.
I guess it might be a bit shocking for you if you just got your bike and havent got sick of seeing the same stock bikes over and over. I just hated all the plastic myself. Different strokes for different folks I guess.
|
|
SDKimo
|
|
(Adjunct)
|
|
05/18/10 06:55 PM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Got mine done
and
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
you gotta cut those tabs off now...haha
|
|
SDKimo
|
|
(Adjunct)
|
|
05/19/10 10:49 AM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
I know...I want to get it running...may be later
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
yeah that one on the right side is the only problematic one. the other one is welded on the inside of the frame rail and you can actually bend it inward and under until the metal cracks. The right side needs the sawzaw and a spot of satin black rusto
|
|
SDKimo
|
|
(Adjunct)
|
|
05/20/10 08:01 AM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
I bent the one on the left side off...I found a use for the one on the right...I will mount my disk lock on it...
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
good idea
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
BUMPERS
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
just sold another to member swa
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Thanks brokenfixed for the bracket - pleasure doing business with you. Looking to do this mod and others over the winter months.
|
|
swa
|
|
(Adjunct)
|
|
11/01/10 03:47 PM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Thanks Tom, nice doing business with ya!
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
trimoto and swa both added to the customer list, no problem fellas let me know if you need anything when you start working on your bike.
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
0% OFF FOR THE HOLIDAYS!
ACT NOW!
|
|
FriarJohn
|
|
("Lighten up, Francis.")
|
|
12/01/10 10:03 PM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
ROFL!
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
isn't that the same discount you offered last year? 
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Youre right, I had to page back and look cause I forgot..haha
Well Folks, with "the economy the way it is" You should feel privileged that prices have remained the same. Most CEO's out there have crinkled under the pressure this fiscal year, but we here at Brokenfixed Inc. are proud to say
0% DISCOUNT ON ALL PURCHASES!
haha
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
where did you put the fuse box?
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
the fuse box is just tucked under the seat. The wiring harness is stiff enough to let it kinda float and rest on top of the battery. Theres other methods done by other users. I particularly like this one because I didnt want to have the box showing. Also I have cut rear shocks and used to blow fuses on hard bumps. This setup allows the fuse box to be free from the chasis.
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
knoxville (the member) added to the customer list
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Quote:
knoxville (the member) added to the customer list
I'm glad you cleared that up b/c I thought you meant the whole city. 
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
I'd be hiring some people if that was the case..haha
|
|
Floyde
|
|
(Greenhorn)
|
|
01/12/11 02:34 AM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Hey Fella
Wondering if you would ship to the Isle of Man?  Its a bit of a hual I know and not sure on the weight? Looking at the $60+ postage set up.
Cheers
Pete
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
PM sent
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
I think I've finally convinced myself that I can handle this mod. Bought my 06 America last March and didn't do anything but change the pipes and ride. It's time. Can you PM me with what I need to do.
Thanks,
Brian
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
sending you a pm now
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
I temporarily mounted the battery box just to get a look at it. Nice work Tom! Got some cleaning to finish up on the back of the motor then I'll get it all buttoned up.
You have my thanks,
- Joe
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Thanks a lot Joe, I'm glad youre happy with it.
Keep me posted with any questions in the future.
Tom
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Smaug added to the list of customers
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
By popular demand (not really..haha)
I've learned some new tricks frome Insane Viking and can offer this variation of the battery relocation.
This allows you to keep the fusebox and ignition block mounted in the same position.
Comparison to the original design where the fusebox is tucked under the seat and the ignition is mounted in the same spot.
|
|
FriarJohn
|
|
("Lighten up, Francis.")
|
|
04/05/11 02:04 PM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
So how much for that? I think I'll buy one of these setups. I like how the ignition switch and fusebox mount and I just don't have time to make my own. I do have a spare battery bracket for hacking up. Then I can get my brass bulldog cover made.
I'll probably have the whole shebang powdercoated so factor that in. No painting needed.
|
|
smaug
|
|
(3/4 Throttle)
|
|
04/05/11 04:29 PM
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Are upgrades free?
|
|
FriarJohn
|
|
("Lighten up, Francis.")
|
|
04/05/11 04:59 PM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
YAY HE'S BACK!
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Friar, you dont use PM's anymore?
if you dont need a tray, and you dont need me to paint it, I guess I'm selling you the back plate?
smaug, are you talking about thunderbirds?
|
|
FriarJohn
|
|
("Lighten up, Francis.")
|
|
04/06/11 02:31 PM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
PM sent, smartguy.
|
|
smaug
|
|
(3/4 Throttle)
|
|
04/06/11 06:02 PM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Nope,Tiger 1050. 
Jk anyway,I like that cluttered unkept look under the seat.
Friar....not really 
|
|
FriarJohn
|
|
("Lighten up, Francis.")
|
|
04/06/11 06:08 PM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Uh huh. To quote Tom, "You dont use PM's anymore?"
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
hey smaug I'll sell you another one. It'll still be cluttered under the seat, just minus the fuseblock.
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Forgot to add Trimoto07 to the list
as well as...
ShaneW
and our very own....
FRIARJOHN!
Welcome to the darkside MOD MAN
As a side note, shanew and friarjohn are the first members to recieve the new alteration keeping the stock position of the fuseblock and ignition assembly.
Hope they work out alright for you fellas, I was kinda flying blind with these. They should be legit...haha. Let me know if theres any problems.
|
|
FriarJohn
|
|
("Lighten up, Francis.")
|
|
04/14/11 01:03 PM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
"Flying blind"... now there's a vote of confidence.
And "Mod man"? What, have I been demoted? 
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
yeah dont void the warranty on that one by opening the shipping box...haha....just kidding
(SERIOUSLY KIDDING FOLKS)
I guess youre not a storm trooper anymore whats above moderator? (yeah I did just welcome YOU to the darkside earlier..shhh)
Its gotta be...
Administrative Darth Vader of Forum Relations?
|
|
FriarJohn
|
|
("Lighten up, Francis.")
|
|
04/15/11 08:05 AM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
A little wordy, and Darth Vader ended up being an emo little teenager, but whatever works.
Hey how come my bracket isn't here yet. You need to use FastEddy's shipping system. 
|
|
FriarJohn
|
|
("Lighten up, Francis.")
|
|
04/16/11 09:34 PM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
You got a tracking number? When is it supposed to get here?
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Quote:
By popular demand (not really..haha)
I've learned some new tricks frome Insane Viking and can offer this variation of the battery relocation.
This allows you to keep the fusebox and ignition block mounted in the same position.
Tom,
Now that you are using my trademarked ignition assembly as well as images of my bike for advertising purposes, I think I am owed a consulting fee, or a 6 pack of consulting fees (possibly a 12 pack, depending on sales). The best place to deliver said consulting fee would be at the NorEast Rally http://noreast.webs.com/ We would love to see you there, the rally is always a great time!!
Carl
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Thanks for the invite Carl, Ive always wanted to go to one, but I never can get enough time off and wife cooperation to make it up...haha
Thanks for the idea though, Capitalism Rocks!
|
|
FriarJohn
|
|
("Lighten up, Francis.")
|
|
04/18/11 02:12 PM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
What are you using for a crank case breather? My current one is bolted to my old custom battery box. Of course that will be going away. And I can't bolt that same breather to my sprocket cover because I have the T-100 version, not the GFG.
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
I use the crankcase breather from newspeedmaster.com with the t-100 sprocket cover. I used that little wire bracket that bolts underneath the sprocket cover to mount my filter. Check out the pic on the first page.
|
|
FriarJohn
|
|
("Lighten up, Francis.")
|
|
04/18/11 06:29 PM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Cool. Thanks.
Don't suppose you have a tracking number on that puppy?
|
|
FriarJohn
|
|
("Lighten up, Francis.")
|
|
04/20/11 02:52 PM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
The slow boat via China finally arrived.
Nice sturdy piece of work. 
Where are the instructions?
I'll try to install this sucker on Saturday. And I'll send back my "core" bracket soon.
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
PM Sent
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Casper, I responded back to you last month, did you get it?
|
|
Madrid
|
|
(Adjunct)
|
|
07/24/11 03:05 PM
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
PM Sent
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Brokenfixed
Are you still making these? If so, could I get one too?
|
|
lylesdo
|
|
(Learned Hand)
|
|
08/14/11 04:55 PM
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Had to bump this just so the abbreviated name would show up in the post list! It gives me a chuckle every time I see it.
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
battery relocation ass reporting...
got a list of recent customers...
-dmy
-EADGBE
-Steve0suprem0
-Steve the Limey
-Martin62
Thanks again fellas!
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
So, I've received my new hardware and installed it this afternoon. I can't test it properly as my K&Ns haven't arrived yet. Everything looks great though. I'm really happy with it.
I do have a question to others that have installed this kit. On the ignition side, how have you finished the vertical section below the ignition? (It has two bolt holes in it)
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
steve do you mean the horizontal piece of frame that the battery used to mount to?
I didnt do anything, but always meant to. I actually got one powdercoated wingnut from my drumset on there now just because they were the same size threads.
You could find an acorn nut or acorn style bolt to fit in there to finish it off.
|
|
Madrid
|
|
(Adjunct)
|
|
09/06/11 09:23 AM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
If you're talking about the horizontal section like Tom said, I just screwed the two hex head battery tray bolts back in.
[image] [/image]
|
|
lylesdo
|
|
(Learned Hand)
|
|
09/06/11 06:33 PM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
I really like this relocation set-up. Very clean. Stupid question, Is there a plate that goes under the seat to hold all the wires up?
|
|
Madrid
|
|
(Adjunct)
|
|
09/06/11 08:24 PM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
There is no plate to support the wiring as part of the kit. Right now the wiring is all piled on top of the battery. I was able to reroute a lot of it and zip tie it out of the way so you don't see it.
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
I picked up some plexiglass at Home Depot and cut out a peice to lay over the top of the battery. Its roughly 2 x 8 inchs and tucks in nicley under the two bolts mounting the assembly to the frame at the back and the battery strap mount point in the front. It lays directly over the terminals, assuming you have the battery oriented so they are closest to the back of the bike.
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
yeah the wires are supported by the main harness and nothing moves.
When I first did it I wanted to put some sheetmetal in there because I was affraid of water kicking up. Well I never got around to it during my "unpainted testing phase", and got caught in a horrible thunderstorm. Next day I went and checked it out and there was no sign of any splash at all. Not even on the swingarm and hardly any on the back of the bracket. So I left it open and havent thought about it since.
Oh la di da, Carl's got another awesome variation big surprise...haha
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
The time has come... PM Sent!
S.
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Thanks for the responses guys (dmy and brokenfixed). It looks great now.
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Sharp21 added to the list
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
member "feogo00" added to the list also
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
CHRISTMAS SALE!
0% OFF!
|
|
FriarJohn
|
|
("Lighten up, Francis.")
|
|
12/08/11 02:28 PM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Such a deal! That's way better than last year's sale. How do you stay in business?
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Might as well just post last years response to your response...
Youre right, I had to page back and look cause I forgot..haha
Well Folks, with "the economy the way it is" You should feel privileged that prices have remained the same. Most CEO's out there have crinkled under the pressure this fiscal year, but we here at Brokenfixed Inc. are proud to say
0% DISCOUNT ON ALL PURCHASES!
haha
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
member "vroom" added to the list
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Quote:
Well Folks, with "the economy the way it is" You should feel privileged that prices have remained the same. Most CEO's out there have crinkled under the pressure this fiscal year, but we here at Brokenfixed Inc. are proud to say
0% DISCOUNT ON ALL PURCHASES!
haha
WOW! With deals like this I can't afford NOT to buy one!
I assume you're extending the sale to MLK day?
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
KaiserSoze added to the list
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Member jblunschi added to the list
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
PM Sent
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Member Hankster added to the list
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Pharmboy327 added to the list (bought a carb brace too)
|
|
lylesdo
|
|
(Learned Hand)
|
|
03/22/12 06:45 PM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Question, if you get and use the billet intake manifolds do you still need the carb brace?
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
ya know you'd probably be fine, they are bolted flanges
though it is screwed into an aluminum piece of metal.
(brace for sales pitch)
Nothing like some suspenders to hold things up...ya know? And really because there's no reason not to. That satin black finish would go nicely with those polished machined pieces of art.
haha
|
|
FriarJohn
|
|
("Lighten up, Francis.")
|
|
03/23/12 09:12 AM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
There is still a rubber adapter, although not as long as stock, I'd put in a brace. Cheap insurance.
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Quote:
(brace for sales pitch)
No pun intended...haha
|
|
Meatz
|
|
(Complete Newb)
|
|
03/27/12 11:28 AM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Are your still in the business of making these?
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
yeah why not...haha
|
|
chuckyj
|
|
(3/4 Throttle)
|
|
03/27/12 04:13 PM
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
ya mine is on order can wait!!
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
you CAN wait? Thats fine.
If only this one was yours...haha
|
|
chuckyj
|
|
(3/4 Throttle)
|
|
03/28/12 04:27 PM
|
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
LOL dam the typo dam you to heck
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Add Meatz to the list (bought a carb brace too)
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
chuckyj added to the list
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
jonboy added to the list (bought a carb brace too)
|
|
CDL
|
|
(Member)
|
|
04/18/12 06:11 PM
|
|
|
|
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
brokenfixed have you sold any to someone with a FI America
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
No I havent...I checked bike bandit for the schematics of a 2010 FI for reference and it looks like you have the same frame and similar airbox, the throttle bodies look similar to the carbs, and the battery bracket looks identical.
I'd be concerned with how much electrical equipment there is to conceal and the fitment of the pods on the throttle bodies. Other than that the basic mechanics of nuts, bolts, and brackets seem to look the same.
I'd offer you a refund if it didnt work out. Just cause youre the first though...haha
|
|
|
|
FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
ANYONE WITH A FUEL INJECTED BIKE THAT'S INTERESTED IN A FREE BRACKET, PM ME ASAP!
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
Pm sent
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
STILL LOOKING
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
Sending PM now
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
I'M STILL LOOKING
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
I have a 2005 BA and wondering what you guys have done with the wire cable retainer that was attached to the lower part battery housing. Just removed all together or attached to somewhere else. Also any ideas where to mount the crank case breather?
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
I really cant remember what I did with the wire hanger on the bottom. I'm gonna guess and say I removed it. Does that have something to do with the rear exhaust hanger?...I never had those on my bike, so things went together differently under there for me.
Crank case breather I have mounted to that little black tab next to the sprocket cover which holds the wires back next to the engine. I drilled a hole in the tab, and mounted it upwards on the sprocket cover, then bolted the filter to it. I thought I had a pic in this thread somewhere towards the begining.
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
heres a pic of the carb brace and where I have my crankcase mounted
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
sconsi added to the list, bought a carb brace too
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
Alright Tom. Got mine done tonight. Stripped a screw on one of the carb pods when changing the main jets to 145, so have to replace that tomorrow and should be able to fire her up. Still not sure what to do with the crankcase breather. Thought of shortening the hose and tucking it up in the middle between the carbs and cylinders. Any other suggestions from this thread? Will post some photos soon.
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
Install is done. Rejetted to 145 main per Dinqua calc. I decided to draw tie the breather to the spine frame so it sits nicely between the pod air filters. I did the battery box cut down and used the fuse/ignition part to free up some space under the seat. The button near the ignition is for the garage door opener. Some photos here of the box and finished job. Thanks for help from Dinqua and Tom. [url=<div style="width:480px;text-align:right;"><embed width="480" height="360" src="http://static.pbsrc.com/flash/rss_slideshow.swf" flashvars="rssFeed=http%3A%2F%2Ffeed580.photobucket.com%2Falbums%2Fss244%2Fpharmboy327%2FBattery%2520Relo%2520-%2520Truimph%2520America%2Ffeed.rss" type="application/x-shockwave-flash" wmode="transparent" /><a href="http://photobucket.com/redirect/album?showShareLB=1" target="_blank"><img src="http://pic.photobucket.com/share/icons/embed/btn_geturs.gif" style="border:none;" /></a><a href="http://s580.photobucket.com/albums/ss244/pharmboy327/Battery%20Relo%20-%20Truimph%20America/" target="_blank"><img src="http://pic.photobucket.com/share/icons/embed/btn_viewall.gif" style="border:none;" /></a></div>]Photobucket[/url]   
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
LOOKING GOOD ADAM!
glad it all worked out for you. thanks for posting
|
|
Madrid
|
|
(Adjunct)
|
|
06/22/12 12:26 PM
|
|
|
|
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
Garage door opener, huh. Pretty slick 
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
I know many people like to cut the tabs off the frame with this mod, yet for the highly unlikely reason that I might want to go back to stock, I left my tabs on and dressed them up a little with these Ace Cafe stickers. By the way, I took the bike in to the dealer yesterday to check the fuel/air mix after the rejet an all seems to be good. She is running better than ever and love the change to the pods.
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
nice idea Adam, glad youre happy with the modifications
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
How do you have the garage door opener set up.
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
you might have to send him a message, this thread dont get much everyday attention.
|
|
foglefar
|
|
(Learned Hand)
|
|
07/25/12 03:17 AM
|
|
|
|
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
So have you tested the relocation bracket on an EFI bike yet?
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
Nope....there was a couple guys at first who eventually backed out. Possibly because I told them "free bracket" doesnt mean "free shipping" and I'll need a lot of pictures from every angle before and after just to be familiar with EFI bikes under the seat.
Are you interested?
|
|
foglefar
|
|
(Learned Hand)
|
|
07/25/12 03:04 PM
|
|
|
|
|
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
Hmmm. A lot to consider ... haven't decided if I want to go this way or not. But I do appreciate the offer.
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
member Gimli added to the list
bought a carb brace too
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
bumpers, its been a while
|
|
1jack1
|
|
(Complete Newb)
|
|
08/30/12 01:34 PM
|
|
|
|
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
PM sent to brokenfixed
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
pm sent Jack
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
1jack1 added to the list
bought a carb brace too
|
|
Leithal
|
|
(Learned Hand)
|
|
09/14/12 12:03 PM
|
|
|
|
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
I tempted to go out and buy an EFI bike just so we can finally let you make a bracket for it.
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
haha....yeah I'm curious myself
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
pm sent to broken fixed
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
bonfire boy added to the list
bought a carb brace too
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
PM'ed
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
MikeVanTso added to the list
bought a carb brace too
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
bumpers
|
|
|
|
Re: FREE BATTERY BRACKET FOR FUEL INJECTED BIKES!
|
|
damn its been a while. Last spring was the most Ive ever built too. Whats everyong got fuel injection now?..haha
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
hi brokenfixed,love the look of this set up with the fuse box and ignition key in original position. I'm in Wales (UK), If your still making these do you ship to this side of the pond? if you do can you quote me a price including shipping.
Thanks.
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
YEAH, PM SENT
|
|
|
|
Re: BATTERY RELOCATION ASSEMBLY ....FOR SALE
|
|
Marty added to the list
|
