PieMan
Adjunct
Reged: 09/09/07
Posts: 122
Loc: Dorset, England
|
|
Hi Guys,
Triumph Twin Power is now open for igniter module rev limiter+ and ignition advance remaping services.
--------------------
Mike (UK)
_____________
04 Bonnie Black
10 Speedmaster
http://www.triumphtwinpower.com
|
B02S4
Learned Hand
Reged: 02/28/08
Posts: 1534
Loc: USA
|
|
Mike, what do you consider reasonable rev limit & advance to be on a 07 SM with no internal mods, long TORS, & Keihin CVK carbs?
|
Gregger
Oil Expert
Reged: 04/07/07
Posts: 2370
Loc: Timmins, Ontario
|
|
Thanks Mike - Any feedback on the 270 ignitor remaps and rev limits ++. Testimonials??? I've read of the improvements on the 360 engines, impressive. 
--------------------
03 Bonneville America
69 BSA Firebird Scrambler
73 Yamaha TX 750
|
trboam
Adjunct
Reged: 01/13/05
Posts: 135
Loc: silver springs,nv
|
|
i've got to tell you that that is some really good info.
i been wantin sumting like this for years.
gonna do it.
stv
|
Bill
Oil Expert
Reged: 01/11/05
Posts: 2009
Loc: Ottawa Ontario Canada
|
|
interesting web site . You can see from their graphic why the stock rev limiter is where it is.
--------------------
2004 America - Starship Touring Edition
|
B02S4
Learned Hand
Reged: 02/28/08
Posts: 1534
Loc: USA
|
|
I didn't see that chart on the TTP website...where is it?
|
Bill
Oil Expert
Reged: 01/11/05
Posts: 2009
Loc: Ottawa Ontario Canada
|
|
Quote:
I didn't see that chart on the TTP website...where is it?
in the section on the america there's a testimonial on the left hand side of the page with a thumbnail graphic of the chart. when you click on it you get the full sized item.
--------------------
2004 America - Starship Touring Edition
|
RaceDweeb
Adjunct
Reged: 02/07/05
Posts: 149
Loc: Detroit
|
|
I've had two modules remapped by Pieman so far. Fast service and a very fair price.
Now if I only didn't have a foot of snow on the ground right now, I'd tell you all about it. 
/Mike
|
69tri1
3/4 Throttle
Reged: 02/07/05
Posts: 925
Loc: Butler, PA
|
|
RaceDweeb,
I am anxious to hear about the upgrade. I think that even another 500-1000 RPM would help. My bike seems to be really pulling about the time the rev limiter is kicking in. Keep us posted! 
|
B02S4
Learned Hand
Reged: 02/28/08
Posts: 1534
Loc: USA
|
|
Quote:
...in the section on the america there's a testimonial on the left hand side of the page with a thumbnail graphic of the chart...
Ah, got it, thanks. That run is for a 790 T100 360 motor. And at that it looks like it's out of steam on or about 8k...
Edited by B02S4 (12/06/08 07:42 PM)
|
Gregger
Oil Expert
Reged: 04/07/07
Posts: 2370
Loc: Timmins, Ontario
|
|
Sent mine out snail mail to have the rev limit increased to 8500  .
Don't need a quick turnaround given the fact that the snow won't be gone until April. Will keep everyone posted.
--------------------
03 Bonneville America
69 BSA Firebird Scrambler
73 Yamaha TX 750
|
Gooseman
3/4 Throttle
Reged: 01/11/05
Posts: 999
Loc: Dark forests of south Sweden
|
|
Greg,
Did you go for the "Rev Limiter+ & Ignition Advance Remap" or "Rev Limiter+"?
Johann
--------------------
Gooseman
Bonneville America 904 Black/Silver
Triumph Tiger 1050 Black
Honda CB500 Four
|
Gregger
Oil Expert
Reged: 04/07/07
Posts: 2370
Loc: Timmins, Ontario
|
|
Rev Limiter only.
I've had some problems with my TPS sensor and disconnected it. My rev limiter was kicking in around 7100rpm but the bike still really pulls strong so 8500rpm it is.
--------------------
03 Bonneville America
69 BSA Firebird Scrambler
73 Yamaha TX 750
|
PieMan
Adjunct
Reged: 09/09/07
Posts: 122
Loc: Dorset, England
|
|
Quote:
Rev Limiter only.
I've had some problems with my TPS sensor and disconnected it. My rev limiter was kicking in around 7100rpm but the bike still really pulls strong so 8500rpm it is.
When your TPS is disconnected the igniter defaults to the 100% WOT map which is the one that is modified. So the benefits are still there to be had.
--------------------
Mike (UK)
_____________
04 Bonnie Black
10 Speedmaster
http://www.triumphtwinpower.com
|
lylesdo
Learned Hand
Reged: 06/26/06
Posts: 1264
Loc: Warrenton VA
|
|
For the rev 1 remap... what do you recommend for the most effective amount of increase? Also, what significance is there in advancing the ignition 3 degrees?
--------------------
'06 TBA - Black, AI and Snorkel removed, K&N Drop In, Gutted Stock Pipes, 145/42, 2 turns out.
|
69tri1
3/4 Throttle
Reged: 02/07/05
Posts: 925
Loc: Butler, PA
|
|
Has anyone installed and tested their remapped Igniter yet? I am really curious to hear how they are working. 
|
B02S4
Learned Hand
Reged: 02/28/08
Posts: 1534
Loc: USA
|
|
I understand there is a price difference between a 3 degree advance & "custom" 2 degree advance...anyone know why?
|
B02S4
Learned Hand
Reged: 02/28/08
Posts: 1534
Loc: USA
|
|
Quote:
I understand there is a price difference between a 3 degree advance & "custom" 2 degree advance...anyone know why?
Buehler...?
|
PieMan
Adjunct
Reged: 09/09/07
Posts: 122
Loc: Dorset, England
|
|
Bumperty, bump. 
--------------------
Mike (UK)
_____________
04 Bonnie Black
10 Speedmaster
http://www.triumphtwinpower.com
|
shadow
Complete Newb
Reged: 04/24/06
Posts: 6
Loc: LI, NY
|
|
For you guys that want to know if this works – here’s my experience. I sent out my igniter earlier this year and with regular shipping took about a week each way with super fast turnaround. No time worries as outside was below 40º at the time. Email communication was excellent beforehand as well as on the return shipping.
Got the advance change along with a slight bump up in the rev limiter, and really think this is the best performance mod I’ve made to the engine. I’d previously done the typical external mods many of us have done: AI & snorkel removed, K&N air filter, 2 of 4 baffles removed from stock mufflers & remaining 2 baffles have 1/2 inch holes drilled, carbs rejetted (Pat's jetting calculator was right on). The bike pulls stronger and if my ears don’t deceive me, the exhaust note is a bit different too – sharper, almost like higher compression. My testing was rather simple: looking for any change in acceleration getting up to an indicated 90 mph. The bike would go past this speed in the past (it’s pushing a rather large 19” Memphis Shades) but would best be described as sluggish up there. Now it easily reaches this speed, I mean easily. Overall acceleration is just snappier, livelier – any way you want to say it - it’s just better than before with NO other mods made. If I had to describe the change in only one word, it would be: responsive. And if you don’t know exactly what I mean by that, let’s just say: faster. Oh, for the record – this is on an ‘05 SM with 10K miles on it.
|
PieMan
Adjunct
Reged: 09/09/07
Posts: 122
Loc: Dorset, England
|
|
Thanks for the review Shadow. It's good to know your bike is running so well with your TTP remap.
--------------------
Mike (UK)
_____________
04 Bonnie Black
10 Speedmaster
http://www.triumphtwinpower.com
|
Previous
Index
Next
Threaded
Edit
Reply
Quote
