oldroadie
Check Pants
Reged: 05/05/07
Posts: 5969
Loc: Alabama USA
|
|
Might as well hit the parts store and buy some hi temp sealer (permatex RTV) and spread some inside the silencer inlet to insure a good seal. If you over tighten the clamp you risk denting the pipe or tearing the clamp...seems like the torque value is around 20ftlbs but you sould check me to make certain.
That, and you can open the mix screws 1/4 turn or so and see how that works for you. Tiny changes, one change at a time so you'll know what works.
--------------------
A positive attitude may not solve all your problems, but it will annoy enough people to make it worth the effort. Herm Albright (1876 - 1944)
|
domsmith
Complete Newb
Reged: 05/17/12
Posts: 5
|
|
The information you shared in the post is really very nice.  I have gathered so many facts. I am glad I visited here. I will definitely keep such points in my mind.
________________
Have a look at plastic hose clamp | plastic wraps .
|
Previous
Index
Next
Threaded
Edit
Reply
Quote
