glen
Greenhorn
Reged: 01/03/07
Posts: 43
Loc: cumbria uk
|
|
Just fitted kuryakyn led indicators to my 04 America ,correctly wired up with
Load equaliser. When I pushed switch all four indicators came on together after a lot of head scratching put on original front indicators and They all worked fine. Has anyone had the same problem.is there a fix for this .
Cheers glen 
--------------------
pilgrim
|
locopony
Loquacious
Reged: 09/01/10
Posts: 4299
Loc: Texas, Houston
|
|
There is a diode that prevents that from happening. the wiring diagram dont show it, but for both sides to cause that dash light to flash there has to be one.
--------------------
Bopin in the bad shine, with a bota bag of fried wine.
http://locoponys.com/
|
B02S4
Learned Hand
Reged: 02/28/08
Posts: 1538
Loc: USA
|
|
LED Flasher
|
oldroadie
Check Pants
Reged: 05/05/07
Posts: 5969
Loc: Alabama USA
|
|
Did you replace the dash indicator too? The dash indicator is across the hot leads in the circuit and it might be the culprit due to the impedence difference. When I put a LED in my dash I learned that I had to use two, one polarized each direction. I think there is a proper LED available for that function now.
--------------------
A positive attitude may not solve all your problems, but it will annoy enough people to make it worth the effort. Herm Albright (1876 - 1944)
|
glen
Greenhorn
Reged: 01/03/07
Posts: 43
Loc: cumbria uk
|
|
Thanks guys some useful information to be going on
Cheers
--------------------
pilgrim
|
glen
Greenhorn
Reged: 01/03/07
Posts: 43
Loc: cumbria uk
|
|
Thanks again removed bulb from dash indicator
now work perfectly. 
--------------------
pilgrim
|
Previous
Index
Next
Threaded
Edit
Reply
Quote
